Skip to product information
1 of 6

StarTech.com

StarTech.com Dual-Bay USB 3.0 to SATA and IDE Hard Drive Docking Station, USB Hard Drive Dock, External 2.5/3.5" SATA I/II/III and IDE (40 pin) SSD/HDD Docking Station, Hot-Swap Hard Drive Bays, Top-Loading

StarTech.com Dual-Bay USB 3.0 to SATA and IDE Hard Drive Docking Station, USB Hard Drive Dock, External 2.5/3.5" SATA I/II/III and IDE (40 pin) SSD/HDD Docking Station, Hot-Swap Hard Drive Bays, Top-Loading

Regular price £79.91 GBP
Regular price Sale price £79.91 GBP
Sale Sold out
Tax included. Shipping calculated at checkout.

SKU:UNIDOCKU33

Low stock: 7 left

StarTech.com Dual-Bay USB 3.0 to SATA and IDE Hard Drive Docking Station, USB Hard Drive Dock, External 2.5/3.5" SATA III / IDE, SSD/HDD Docking Station, Hot-Swap Drive Bays, Top-Loading (UNIDOCKU33)

External SSD/HDD Docking Station | USB 3.2 Gen 1 (5 Gbps) to SATA III and IDE

The UNIDOCKU33 USB 3.0 Universal HDD / SSD Dock enables you to instantly access your 2.5 or 3.5in IDE and SATA hard drives through two top loading drive slots, saving you the hassle of mounting the drives into a computer or external enclosure or tray.

Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps), solid state drives (SSD) and hybrid, drives with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. See our UASP testing results below for further details.

The slot-loading design holds the SATA and IDE drives upright inside the docks, neatly keeping them off the desk, for convenience and a clutter-free setup. For SATA drives, the HDD can be inserted and connected directly through the designated dock slot, while the IDE drive slot is conveniently positioned near the rear panel 40-pin data and LP4 power connections, making it easy to connect to the dock using the included IDE data and power cables.

A single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously - a convenient solution for migrating data from an IDE drive to a SATA drive or vice versa. The dock can also be used to greatly increase the storage and backup capabilities of your computer system with support for high capacity drives (tested with up to 6TB 3.5" and 2TB 2.5" drives).

The UNIDOCKU33 is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Improved Performance with UASP

UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.

At the same peak in testing UASP also shows an 80% reduction in required processor resources.

Testing results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.

The StarTech.com Advantage


Hard drive
Maximum storage capacity 6 TB
Number of storage drives supported 2
Storage drive sizes supported 2.5,3.5"
Storage drive interface Parallel ATA (IDE), Serial ATA, Serial ATA II, Serial ATA III
Storage media type HDD, SSD
Ports & interfaces
DC-in jack Yes
USB 3.2 Gen 1 (3.1 Gen 1) ports quantity 1
Host interface USB 3.2 Gen 1 (3.1 Gen 1) Type-B
Features
Certification CE, FCC
Chipset JMicron - JMS561U, JMD330
LED indicators Activity, Power
UASP support Yes
Mean time between failures (MTBF) 30000 h
RAID support No
Plug and Play Yes
Hot-swap Yes
Material Plastic
Product colour Black
Maximum data transfer rate 5 Gbit/s
Cooling
Built-in fan No
Power
Power plug type Type M
Output current 3 A
Output voltage 12 V
Input current 1.3 A
AC input voltage 110-240 V
Weight & dimensions
Weight 500 g
Height 70 mm
Depth 147 mm
Width 130 mm
Packaging content
Manual Yes
Cables included USB
AC adapter included Yes
Operational conditions
Operating relative humidity (H-H) 8 - 90%
Storage temperature (T-T) -40 - 70 °C
Operating temperature (T-T) 5 - 80 °C
Packaging data
Package weight 1 kg
Package height 214 mm
Package depth 187 mm
Package width 123 mm
Technical details
Compliance certificates RoHS
Logistics data
Products per master (outer) case 10 pc(s)
Master (outer) case height 450 mm
Master (outer) case length 625 mm
Master (outer) case width 210 mm
Harmonized System (HS) code 84733080
View full details