Supports 802.3at, PoE+, 30W and LTPoE++, 4-pair up to 70W
Supplies up to 70W of PoE power
Supports 100 and 1000Mbps fiber SFP modules (IMC2000/SP)
Auto MDI/MDI-X
Smart Missing Link (SML)
Supports up to 10K jumbo frames
Supports multi-mode fiber
4K MAC address table
Store-and-forward switching mode
Transparent to IEEE 802.1Q packets
Standalone or DIN rail mount
Fanless for silent operation
TAA, 10/100/1000T to 100X/1000X SFP Industrial Temp Gigabit Media Converter
10/100/1000T to 100Mbps/1000Mbps SFP industrial temperature media converter. These converters feature Smart MissingLink™ (SML) and support up to 10K jumbo frames. The IMC2000T/SP-980 can be mounted on a DIN-rail or used as a desktop/standalone device and is fanless for silent operation.
Powering remote devices Allied Telesis IMC200/2000 Series Industrial Media Converters (IMCs) are ideal for powering remote devices, such as IP phones, video cameras and wireless Access Points (APs), which are more than 100m from a Power over Ethernet (PoE) switch. Each IMC can provide up to 70W of PoE.
The 2000T/SP and the 2000TP/SP each feature a 10/100/1000T twisted-pair port, and an SFP port which supports and auto detects 100X and 1000X optics. No switch configuration is needed. Allied Telesis offers a wide variety of SFPs featuring multimode, single mode and BiDi optics.
Models with a fixed fiber-optic port are available with SC or LC connectors. With these, you can achieve distances up to 2 km (100Mps) or 550 m (1000Mps). With the SFP model, you can achieve greater distances using a long-range SFP.
In addition to transmitting data, the twisted-pair port also injects power down the cable, allowing a remote PoE powered device to operate without any additional power source. All PoE+ devices (IEEE802.3at compliant) are supported. All PoE+ devices support 802.3at, PoE+, LTPoE++ and 4-pair. The PC200x PoE+ Series can deliver up to 70W of power to the remote device.
Remote Power Cycle The IMC200/2000 Series supports the Remote Power Cycle feature. This allows a remote administrator to log in to the host switch device and disable the switch port to which the IMC is attached, causing the PoE+ device to lose power. This allows administrators to reset remote devices without physically going to the location.
Jumbo frame support Many backbone switch products support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) which sends extra-long data packets on the network. The IMC200/2000 Series are fully compatible with these long packets, enabling them to be used in modern networks.
Smart MissingLink™ (SML) The SML feature monitors network connections and provides a notification when a link fails, allowing administrators to quickly identify the source and location of failed links, and thus minimize downtime.
Network
Duplex system
Full, Half
Store-and-forward
Yes
Auto-negotiation
Yes
Auto MDI/MDI-X
Yes
VLAN support
Yes
Jumbo frames
10000
Jumbo frames support
Yes
Packet forwarding rate (1 Gbps)
1488000 pps
Packet forwarding rate (100 Mbps)
148800 pps
Packet forwarding rate (10 Mbps)
14880 pps
Ethernet LAN data rates
10,100,1000 Mbit/s
Ethernet interface type
Fast Ethernet, Gigabit Ethernet
Converter output interface
100Base-X, 1000Base-X
Converter input interface
10Base-T, 100Base-T, 1000Base-T
Maximum data transfer rate
1000 Mbit/s
Ports & interfaces
Fiber optic connector
SFP
Fiber ports quantity
1
Ethernet LAN (RJ-45) ports
1
Connectivity technology
Wired
Performance
Rx power (max)
-3 dBmW
Rx power (min)
-17 dBmW
Tx power (max)
-4 dBmW
Tx power (min)
-9.5 dBmW
Wavelength
850 nm
Design
Certification
TAAEMI/Emission & StabilityFCC Class AEN55024 (immunity standard)EN55032 Class AEN55035VCCI Class A
Safety
UL 62368-1, EN 62368-1, UL 60950-1 (UL mark), CAN/CSA C22.2 No. 60950-1 (cUL mark), EN 60950-1 (TUV mark)
